Troubleshooting guide
Lippert In-Wall slide red or green LED fault
Use this when a Lippert In-Wall slide controller uses green LED motor identification and red LED blink counts for low voltage, battery dropout, high voltage, excessive current, motor short, wire short, encoder, or hall-power faults.
Use this atlas to identify likely meaning and prepare for service. Shut off power, LP gas, fuel, or water when a listed appliance condition involves flame, gas smell, exhaust, generator shutdown, high temperature, moving jacks/slides, refrigerant, 120 VAC, control boards, repeated ignition failure, or a persistent lockout. Call the appliance maker, RV dealer, or a qualified RV technician for repair.
Owner-safe checklist
- Stop slide movement and record the red LED flash count plus whether the green LED indicates motor 1 or motor 2.
- Reset only from the normal slide switch as the manual describes, then stop if the same LED fault returns.
- Use normal RV charging or shore power for low-battery symptoms; do not jump the controller or attach power to controller terminals.
- Use qualified service for circuit breakers, wiring, motor harnesses, controller override, motor disengagement, or repeated LED faults.
Code tables for these appliances
- Lippert In-Wall slide-out 7 codes