Norcold ยท 12 codes
Norcold N10LX / NA10LX refrigerator fault codes
Every fault code, display message, and status light listed in Norcold's manuals for Norcold N10LX / NA10LX. Select a code for what it means, what you can safely check, and when to call a technician.
Confirm your model
Codes are model-specific. Match the model number on the appliance data label to one of these before using the table:
N10LX, NA10LX, N10LXIM, NA10LXIM
Where to look and what to record
- model and serial label
- photo of display code
- power mode shown on display
Code table
| Code | What the manufacturer says |
|---|---|
| no FL | The burner did not ignite or re-ignite |
| no AC | AC voltage is not available to the refrigerator |
| AC HE | This fault indicates a problem relating to the AC heater |
| AC rE | This fault is within the refrigerator controls |
| Lo dc | DC input voltage to the refrigerator is too low with an audible alarm |
| HI dc | DC input voltage to the refrigerator is too high |
| no dt | This fault indicates a loss of communication between the refrigerator controls |
| Sr | This fault is within the refrigerator electronic controls |
| oP LI | This fault is within the refrigerator electronic controls |
| FL -- | A flame is sensed at the burner when there should be none present |
| temperature setting flashes | The thermistor has been sensed as inoperable, so temperature is controlled via backup operating system |
| blank display | The refrigerator is off or will not turn on |
Do not hand-light, clean burner parts, adjust LP gas, bypass refrigerator controls, or open electrical compartments. Shut off LP if gas odor is present and arrange qualified Norcold service for unresolved faults.