Norcold ยท 14 codes
Norcold N4000 touchscreen refrigerator fault codes
Every fault code, display message, and status light listed in Norcold's manuals for Norcold N4104 / N4141 / N4150. Select a code for what it means, what you can safely check, and when to call a technician.
Confirm your model
Codes are model-specific. Match the model number on the appliance data label to one of these before using the table:
N4000 touchscreen, N4104, N4141, N4150, N4104Axx, N4141Axx, N4150Axx
Where to look and what to record
- N4000 touchscreen model and serial label
- photo of display code
- selected source shown on display
Code table
| Code | What the manufacturer says |
|---|---|
| 1 | If error code 1 is visible, directly contact your dealer or a Norcold Service Center. |
| 2 | If error code 2 is visible, directly contact your dealer or a Norcold Service Center. |
| 3 | Code 3 as: The refrigerator does not work on gas; check the bottle and shutoff state, turn the refrigerator off and on again, and try another power source. |
| 4 | If error code 4 is visible, directly contact your dealer or a Norcold Service Center. |
| 5 | If error code 5 is visible, directly contact your dealer or a Norcold Service Center. |
| 6 | The refrigerator does not work on 12V; make sure the engine is running and try another power source |
| 7 | The refrigerator does not work on 12V; make sure the engine is running and try another power source |
| 8 | If error code 8 is visible, directly contact your dealer or a Norcold Service Center. |
| 9 | If error code 9 is visible, directly contact your dealer or a Norcold Service Center. |
| 10 | The refrigerator does not work on 120V; check if 120V AC is available and try another power source |
| 11 | The refrigerator does not work in AUTO mode; check connected sources and try to run manually on a power source |
| 12 | If error code 12 is visible, directly contact your dealer or a Norcold Service Center. |
| 13 | If error code 13 is visible, directly contact your dealer or a Norcold Service Center. |
| 18 | All symbols on the control panel light up; wait a few seconds until the refrigerator starts normal |
Do not hand-light, clean flame parts, adjust LP gas, bypass refrigerator controls, or open electrical compartments. Shut off LP if gas odor is present and arrange qualified Norcold service for unresolved faults.