Suburban water heater · 1 model line
Suburban water heater: RESET light
The Suburban tank water heater guide describes red RESET light lockout after ignition attempts fail.
What this message means by model
| Model line | What the manufacturer says | Source |
|---|---|---|
| Suburban D / DE / DEL water heaters | The Suburban tank water heater guide describes red RESET light lockout after ignition attempts fail. | Suburban Tank Water Heaters Operation & Maintenance Guide |
What you can safely check
- Turn the water heater off.
- Confirm the tank is full.
- Stop repeated attempts if ignition fails.
Stop and call a technician for
- Ignition, flame, gas valve, electrode, soot, combustion, and board work is qualified service.
Do not cycle the water heater repeatedly after failed ignition. Shut off LP/power and call service if lockout returns.
Write this down before you call
- Suburban model plate
- inside switch panel
- LP mode status
Related troubleshooting guides
- RV water heater has no heat or lockout light
- Suburban tank water heater RESET light or ignition lockout
- Suburban tank water heater P/T relief drip or lost air pocket
- Suburban tank water heater rotten-egg odor or anode issue
- Suburban tank water heater winterizing, drain, or freeze risk
- Suburban water heater soot, gas smell, flame, or combustion service boundary