Dometic refrigerator · 1 model line
Dometic refrigerator code CHECK
The Dometic Americana operating instructions say an illuminated CHECK lamp means the controls failed to ignite in GAS mode.
What code CHECK means by model
| Model line | What the manufacturer says | Source |
|---|---|---|
| Dometic Americana RM2351-RM2554 / DM2652-DM2862 / NDM1062 | The Dometic Americana operating instructions say an illuminated CHECK lamp means the controls failed to ignite in GAS mode. | Dometic Americana RM/DM/NDM Refrigerator Operating Instructions |
What you can safely check
- Record the CHECK lamp state and current mode.
- Retry from the front ON/OFF control only as the manual describes.
- If the CHECK lamp returns, use another safe mode if available and arrange service.
Stop and call a technician for
- LP ignition, LP hardware, flame-safety, refrigerator control, and repeated CHECK lamp diagnosis are service-only.
Do not open gas, electrical, or cooling-system components; use only documented front-panel actions and call qualified RV service for repeated faults.
Write this down before you call
- Interior data label model, product number, serial number
- Front display code or lamp state photo
- Power module/display board part number if service requests it
Other codes on Dometic Americana, DM/DMA and RM2xxx refrigerators
Full table: Dometic Americana, DM/DMA and RM2xxx refrigerators
- temperature sensor limp mode If the control cannot read the temperature sensor and control the preset temperature, the…
- display module limp mode A nonfunctional display module can put the refrigerator in full automatic operation with …
- temperature-sensing circuit limp mode A temperature-sensing device or associated electronic-circuit failure makes the cooling u…
- CHECK flashing + buzzer If the burner fails to ignite in gas mode, the CHECK indicator lamp flashes on and off an…
- temperature sensor failure limp mode For DM2682, DM2683, DMA4064, DMA4067, DMA4068, DM2882, DMA4084, and DMA4087 refrigerators…