Dometic refrigerator · 1 model line
Dometic refrigerator code E35: A cooling or control fault that needs model-specific diagnosis
Dometic documentation lists E35 as “A cooling or control fault that needs model-specific diagnosis”.
What code E35 means by model
| Model line | What the manufacturer says | Source |
|---|---|---|
| Dometic RUC | The Dometic RUC refrigerator support table lists E35 as a cooling or control fault that needs model-specific diagnosis. | My refrigerator is giving me a fault message | RUC Refrigerator | Support |
| Dometic RUCShown as: Display fault E35 | The official Dometic RUC support page for display fault E35 says to make sure refrigerator ventilation is not obstructed, notes that extreme ambient temperatures can trigger the over-temperature code, and says remaining repair requires an authorized service provider. | Display shows fault: E35 | RUC Refrigerator | Support |
What you can safely check
- Turn the refrigerator off if cooling is abnormal.
- Check that vents are not blocked.
- Record the model number, code, and recent power source before service.
- Record display fault E35 and take a photo of the display.
- Check only owner-visible refrigerator ventilation openings for obstruction.
- Note ambient temperature and reset the error once by pressing the encoder button for 3 seconds until a beep is heard.
Stop and call a technician for
- Internal cooling, gas, electrical, or control diagnosis belongs to an authorized Dometic service provider.
- A continuing E35 over-temperature fault must be handled by an authorized service provider.
- Cooling-system, compressor, airflow-system, sensor, wiring, and control-electronics diagnosis are service-only.
Do not bypass refrigerator safety controls or work on LP/electrical components. Shut off LP and power if you smell gas, see scorching, or the unit behaves abnormally.
Do not remove refrigerator panels, service airflow components, wiring, sensors, compressor/cooling components, or controls; use only owner-visible ventilation checks and front-panel reset before qualified service.
Write this down before you call
- model number label
- serial number
- control board part number if visible without disassembly
- RUC model label
- ambient temperature and visible ventilation status
Other codes on Dometic RUC refrigerators
Full table: Dometic RUC refrigerators
- E03 Reset the error with the encoder button and continue to authorized service if the problem…
- E18 Reset the error with the encoder button and continue to authorized service if the problem…
- E32 Reset the error with the encoder button and continue to authorized service if the problem…
- E33 Check battery voltage and reset the error with the encoder button.
- E34 Make sure the refrigerator was not filled with warm goods, then reset the error with the …
- W01 Reset the error with the encoder button and continue to authorized service if the problem…
- W02 Reset the error with the encoder button and continue to authorized service if the problem…
- W04 Reset the error with the encoder button and continue to authorized service if the problem…
- W10 Make sure the door is properly closed, then reset the error with the encoder button if ne…
- W11 Check battery voltage and reset the error with the encoder button.
- W14 Reset the error with the encoder button and continue to authorized service if the problem…
- W17 Reset the error with the encoder button and continue to authorized service if the problem…
- W19 It is a low-voltage error, to check battery voltage, and to reset the error with the enco…
- W26 Reset the error with the encoder button and continue to authorized service if the problem…